QuickTime records your screen and your microphone. It does not record the music, the video call, or the app that is playing through your speakers. That is not a bug in QuickTime; it is how macOS isolates audio between apps. This guide covers the two honest paths: browser tab audio with no driver, and whole-system audio with a virtual device.
Why Mac system audio is harder than it looks
On Windows, a recorder can usually ask for "what you hear" and get it. macOS has no equivalent built-in source. Audio goes from an app to an output device, and a recorder needs an input device to read it. Unless an app plays into a device a recorder can read, the sound never reaches the recording.
That is why the common Mac advice is "install BlackHole". It works, but it is not always necessary. If the sound comes from a browser tab, the browser can hand that tab's audio to the recorder directly.
Pick the right method first
| Sound source | Method | Setup |
|---|---|---|
| YouTube, web apps, browser meetings | Browser tab audio | None. Tick "Share tab audio". |
| Desktop apps, system alerts, local media players | Virtual audio device plus a recorder | Install BlackHole or Loopback and route audio |
| One app's audio, macOS 13 or newer | OBS with ScreenCaptureKit | Install OBS, choose the app to capture |
Most people who search for "record system audio on Mac" are recording a browser tab. Start there. If the sound comes from a desktop app, skip to the virtual device section.
Method 1: Record tab audio without installing anything
This works in Chrome, Edge, and Brave on macOS. It captures the sound from one tab plus your microphone, which covers tutorials, webinars, demos, and browser-based calls.
Step 1: Grant the browser permissions
Open System Settings, go to Privacy & Security, and check Screen Recording and Microphone for your browser. macOS applies permission changes after a browser restart, so quit and reopen it if you just granted access.
Step 2: Put the content in its own tab
Load the video or web app in a dedicated tab and start playback. A tab that is muted, or a page that has not started audio, will not offer an audio track to share.
Step 3: Start the recording and share the tab
Open the Mac recording guide in another tab, or go straight to the recorder. Click Start Recording, choose Chrome Tab in the picker, and select the tab with the sound. Tick Share tab audio at the bottom left of the dialog.
Step 4: Add your microphone and test
Toggle the microphone on, wear headphones, and record ten seconds. Listen back before the real take. If the tab audio is missing, the checkbox is the first thing to check and the mute state of the tab is the second.
Step 5: Stop and save
Press S to stop, then download the file or upload it for a share link. Free recordings cap at 5 minutes and 720p30; PRO unlocks longer recordings and 4K60.
Method 2: Whole-system audio with BlackHole
BlackHole is a free, open-source virtual audio device. It creates an output device that macOS can play into and that a recorder can read from. The catch is that you also want to hear the audio while it records, which is why the setup uses a Multi-Output Device.
- Install BlackHole. Pick the 2-channel version unless you have a specific reason to need more.
- Open Audio MIDI Setup. It lives in Applications, inside Utilities.
- Create a Multi-Output Device. Click the plus button, choose Create Multi-Output Device, then tick both your speakers or headphones and BlackHole.
- Set the Multi-Output Device as your output. Select it in the Sound menu or in Control Center. You now hear the Mac and BlackHole receives the same audio.
- Select BlackHole as the recorder's input. In OBS, add an Audio Input Capture and choose BlackHole. In a browser recorder, choose BlackHole as the microphone device if you want system audio instead of your voice.
- Record a test. Play a few seconds of sound, stop, and confirm the level meter moved. Silent input is almost always the wrong device selected somewhere in the chain.
Loopback does the same job with a friendlier interface and more routing options, but it is paid. If you only need this once, BlackHole is the cheaper path.
Method 3: OBS with ScreenCaptureKit
OBS 28 and later can capture application audio on macOS 13 and newer through ScreenCaptureKit. Add a macOS Screen Capture source, pick the application, and enable its audio. This avoids a virtual device when you want one app's sound rather than the whole system.
OBS is the right tool for multi-source production: scenes, overlays, several audio tracks. It is the wrong tool for a two-minute update that you want to send as a link.
The three settings people forget
- Headphones. Recording system audio through speakers feeds the speakers back into the microphone.
- Sample rate. If BlackHole and the Multi-Output Device disagree, audio can drop out. Keep both at 48 kHz in Audio MIDI Setup.
- Output device after recording. If you leave the Multi-Output Device selected, some apps behave oddly with volume keys. Switch back to your normal output when you are done.
When to use each method
If the sound is in a tab, use the browser. It is one checkbox and no install. If the sound is a desktop app, use BlackHole or Loopback. If you need scenes, multiple tracks, and a repeatable production setup, use OBS. Matching the tool to the source saves an hour of routing work.
Conclusion
Mac system audio is not captured by default, but "not by default" is not the same as "impossible". For browser content, share the tab and tick the audio box. For everything else, route it through a virtual device and test before the long take.